Safety Cut-Outs

Model CO100

 
Model CO100

 Suits : General
  • Reliable.
  • Compact and easy to fit.
  • Green operating indicator.
  • Protected circuit 'sparkle proof'.
  • High tension or direct pick up.
  • Automatic prime circuit.
  • Single point mounting.
  • Short circuit proof.
  • Silent operation.
  • No moving parts.

Technical Information , Frequently Asked Questions , Warranty

 

Model CO101

 
Model CO101

 Suits : General
  • Suppressed Circuit.
  • Reliable.
  • Compact and easy to fit.
  • Red operating indicator.
  • Protected circuit 'sparkle proof'.
  • High tension or direct pick up.
  • Automatic prime circuit.
  • Single point mounting.
  • Short circuit proof.
  • Silent operation.
  • No moving parts.

 

Technical Information , Frequently Asked Questions , Warranty

 

Model GS101

Self contained fuel gauge and dual fuel change over switch with an optional safety cut-out incorporated to simplify wiring and installation. By incorporating more than one device in the same case some of the wiring is eliminated. Requires a 0-90 Ohm resistive gauge sender such as the Axiom VARI-OHM (Model VX041PV) supplied by APA Industries Pty. Ltd., the STM (Model MV045A) supplied by STM Auto Gas Tanks Pty. Ltd., or the Apexus Gauge Interface (Model GI100). Apexus fuel gauges are supplied with mounting hardware and quality connectors for quick and reliable installation.
Model GS101-2 (2 position switch)
Model GS101-3 (3 position switch, preferred type)

Picture of GS101

 Suits : General
  • Fuel gauge, dual fuel change over switch and safety cut-out combination in one compact unit.
  • 5 Lamp LED gauge.
  • Extra bright display for daylight visibility.
  • Automatic self dimming display for night viewing.
  • Back lit scale for clear readability.
  • High quality plastic case.
  • Protected electronic circuit.
  • Includes mounting materials and connectors.
  • Reliable high power 5 Amp output.
  • Cut-out short circuit protected.
  • In-build function indicator.
  • Automatic prime for easy starting.
  • Silent operation.

Technical Information , Frequently Asked Questions , Warranty

 

Technical Information

Safety Cut-Out (Model CO100 & CO101)
Download Adobe Acrobat Reader

Frequently Asked Questions

Question
When first turning on the ignition the indicator fails to light up and therefore does not prime the gas system ?
Answer
This type of condition occurs if the unit does not receive power, please recheck your earth point and power wire.

Warranty

Apexus Pty. Ltd. supplied safety cut-outs are warranted against faults in manufacture or componentry for the life of the vehicle the device is originally fitted to. Upon receipt of a faulty safety cut-out Apexus Pty. Ltd. will repair or replace the safety cut-out at no cost to the owner. All freight charges for shipping faulty safety cut-outs to or from Apexus Pty. Ltd. remain the responsibility of the owner. As Apexus Pty. Ltd. has no control over the installation the warranty does not extend to consequential or subsequent damage.

Home Page